1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. The forum migration is complete. We had some issues with the hosting provider and I had to restore the server a 2nd time so if you happened to post from about 9:30pm - 11pm PST your post may have been removed. Please double check to see if its still there. If you have any issues post them in the technical support forum or email the AAW Forum Staff at forum_moderator@aawforum.org. Thanks!
    Dismiss Notice
  3. Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Vicmarc Jaws and Faceplate Ring

Discussion in 'Marketplace Archives' started by Dave Fritz, Sep 28, 2020.

Thread Status:
Not open for further replies.
  1. Dave Fritz

    Dave Fritz

    Joined:
    Jul 24, 2008
    Messages:
    361
    Location (City & State):
    Montfort, Wisconsin
    Vicmarc V00401 Face Plate Ring https://www.woodworkersemporium.com/Vicmarc_V00401/

    Vicmarc V00677VM120 https://www.woodworkersemporium.com/Vicmarc_V00677/

    USPS Flat Rate Shipping Included (US only)

    Pay Pal Only Please $70.00

    Clarification, the faceplate will not work with the jaws being sold. They're too large and do not have the dovetail on the outside. The jaws that would be required would have to have a dovetail on the outside and expand a max. of just under four inches. I have never used the faceplate so if I'm in error I apologize.
     
    Last edited: Sep 28, 2020
  2. David McWilliams

    David McWilliams

    Joined:
    Dec 28, 2013
    Messages:
    11
    Location (City & State):
    Strafford, VT
    I would be interested in just the jaws. Would you take $55 for them?
     
  3. David McWilliams

    David McWilliams

    Joined:
    Dec 28, 2013
    Messages:
    11
    Location (City & State):
    Strafford, VT
    Never mind. I measured wrong.
     
  4. taxman

    taxman

    Joined:
    Dec 4, 2006
    Messages:
    82
    Location (City & State):
    Cooper City FL (near Ft Lauderdale)
    Home Page:
    Sending Private message
     
  5. Dave Fritz

    Dave Fritz

    Joined:
    Jul 24, 2008
    Messages:
    361
    Location (City & State):
    Montfort, Wisconsin
  6. Timothy Allen

    Timothy Allen

    Joined:
    Sep 11, 2019
    Messages:
    113
    Location (City & State):
    NH and ME
    e-mail sent
     
  7. Dave Fritz

    Dave Fritz

    Joined:
    Jul 24, 2008
    Messages:
    361
    Location (City & State):
    Montfort, Wisconsin
    Items are sold
     
Thread Status:
Not open for further replies.

Share This Page