1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. The forum migration is complete. We had some issues with the hosting provider and I had to restore the server a 2nd time so if you happened to post from about 9:30pm - 11pm PST your post may have been removed. Please double check to see if its still there. If you have any issues post them in the technical support forum or email the AAW Forum Staff at forum_moderator@aawforum.org. Thanks!
    Dismiss Notice
  3. Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

VEGA 26" BOWL LATHE

Discussion in 'Marketplace Archives' started by Rick Anderson, May 16, 2019.

Thread Status:
Not open for further replies.
  1. Rick Anderson

    Rick Anderson

    Joined:
    Jul 7, 2007
    Messages:
    17
    VEGA 2600 BOWL LATHE, EXCELLENT CONDITION.
    26” SWING.....17” BETWEEN CENTERS
    LEGS ADJUST FOR HEIGHT
    HEAVY DUTY BANJO
    HEAVY STEEL CONSTRUCTION: 525 LBS.
    3/4” THICK X 13” WIDE LATHE BED
    TOSHIBA 2 HP. MOTOR, 220 VOLT W/ TOSHIBA VARIABLE SPEED FREQUENCY DRIVE
    HEADSTOCK: 1-1/4”- 8 TPI MORSE #2 TAPER
    CUSTOM SPINDLE LOCK
    REINFORCED & REMOVABLE TAILSTOCK: FOR HOLLOWING & TURNING INSIDE OF BOWLS
    3/4” THICK X 12” WIDE LATHE BED
    CONCRETE FILLED HEADSTOCK FOR VIBRATION ABSORPTION
    SEVERAL TOOL RESTS INCLUDING 9” ROBUST TOOL REST, DRIVE CENTER, LIVE CENTER, TAILSTOCK EXTENSION
    LOCAL PICKUP ONLY IN BELLINGHAM, WA.
    BUYER RESPONSIBLE FOR MOVING.
    $1750 Cash.

    RICK ANDERSON
    360-319-7600
    Rick98229@yahoo.com
     

    Attached Files:

  2. Emiliano Achaval

    Emiliano Achaval Administrator Staff Member

    Joined:
    Dec 14, 2015
    Messages:
    2,244
    Location (City & State):
    Maui, Hawaii
    Home Page:
    What a great deal on a super nice lathe! Our club got one, was donated to us. You should not have a problem selling her. Aloha
     
  3. Damon McLaughlin

    Damon McLaughlin

    Joined:
    Jan 16, 2017
    Messages:
    278
    Location (City & State):
    Eastern Washington
    If I could figure out how to get it to the other side of the state (Spokane) I would be really tempted!!
     
  4. Dean Center

    Dean Center

    Joined:
    May 4, 2010
    Messages:
    1,067
    Location (City & State):
    Bozeman, MT
    Damon, it's in Bellingham, so you know it's covered in mold and stuff...;)
     
  5. Rick Anderson

    Rick Anderson

    Joined:
    Jul 7, 2007
    Messages:
    17
Thread Status:
Not open for further replies.

Share This Page