• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

vacuum chuck pics for a jet 16-42

Joined
Dec 22, 2006
Messages
73
Likes
1
Location
Grimes, Iowa
Website
www.scrollsaws.com
1642 Vacuum Chuck

I have pictures on my web site of the setup I made. The part to attach it to the lathe was easy to make. The guages and valve setup I bought on the web as a kit. Then the pump came from Nebraska Surplus. Look down the index into lathe and the vacuum chuck.

http://www.scrollsaws.com
 
Joined
Feb 16, 2006
Messages
46
Likes
2
Location
Sandy, Utah
Website
www.turnedoutright.com
Back
Top