• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Keven Jesequel for "Big Leaf Maple" being selected as Turning of the Week for April 15, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Oneway Talon Scroll Chuck Spindle Adaptor

Status
Not open for further replies.
Edward Fasano

Edward Fasano

Joined
Oct 6, 2019
Messages
31
Likes
20
Location
Kernersville, NC
(SOLD) Oneway Talon Scroll Chuck Spindle Adaptor (revised)
$11.00
Allows mounting of Oneway Talon scroll chuck (#20761) to lathe with a 1" x 8 TPI drive spindle.
Condition is used/excellent. Clean jacking threads and taper.
NOTE: The Allen key and the three (necessary) mounting screws pictured ARE NOT included. This offer is for the spindle adapter only. I'm sorry if the image causes any confusion. It is not meant to mislead.
I can ship it via USPS for $6.00.
Ed Fasano
erfasano@msn.com
 

Attachments

  • 72710778_10211516229300422_1519531567871950848_o.jpg
    72710778_10211516229300422_1519531567871950848_o.jpg
    54.8 KB · Views: 35
Last edited:
Timothy Allen

Timothy Allen

Beta Tester
Beta Tester
Joined
Sep 11, 2019
Messages
212
Likes
148
Location
Maine
I suspect Ed means the original Oneway "basic" chuck instead of the Stronghold. The basic chuck is the one that uses tommy bars instead of a chuck key to adjust, tighten, and loosen the jaws. The taper lock adapters are the same for the Oneway "basic" and the Talon, as are many of the jaws.
 
Status
Not open for further replies.
Back
Top