It's got a Reeves drive and has it's tailstock on backwards. It is advertised as a 42" lathe. Other than that I'm wondering if any of you can identify what I'm looking at here. The owner is asking $500.
-
We just finished moving the forums to a new hosting server. It looks like everything is functioning correctly but if you find a problem please report it in the Forum Technical Support Forum (click here) or email us at forum_moderator AT aawforum.org. Thanks! -
Beware of Counterfeit Woodturning Tools (click here for details) -
Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details) -
Congratulations to Dave Roberts for "2 Hats" being selected as Turning of the Week for April 22, 2024 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Name This Jet Lathe
- Thread starter Dan Hall
- Start date
Looks like a Jet 1442. Can’t comment on the asking price.
Isn't there any type of data plate with electrical, etc.??
We have 2 in our high school shop set up. They work fine, except it's got the Reeves drive. The lowest speed is not very low, you can only change speed with the lathe running, and the availability of a replacement sheave, when eventually one goes bad, is unlikely. If you're handy and could retrofit it with a VFD when the time comes, they are otherwise satisfactory, IMHO.
. I haven't seen it. It's a Craigslist ad about an hour and a half away. We may be buying a place with a 24'x36' shop soon so I think I'll wait and get a modern VFD controlled lathe.
. I have thought of that but for a 14" lathe I doubt it would be worth my time.
- Joined
- Jan 27, 2005
- Messages
- 12,897
- Likes
- 5,186
- Location
- Dalworthington Gardens, TX
- Website
- pbase.com
As Owen and Dean have said it is a Jet 1442 with Reeves drive. I almost bought one fifteen years ago, but instead I bought it's rival, the Delta 1440 with Reeves drive. The Delta sold for about $700 on sale and the Jet was typically a hundred dollars higher. The Reeves pulleys on both lathes were die cast zinc which turned out to be a durability problem for variable spaced pulley service. Another issue with the Jet, Delta and similar entry level Reeves drive lathes is that the slowest speed is still way too fast for a bowl lathe. While the Jet was a little better than the Delta in reliability and maintenance, I wouldn't give a plug nickel for either of them.
Had a HF lathe with Reeves drive. Never again. Went with a Rikon with VS.
Thanks fellers.
The reeves drive is the weak component on these lathes, they wear out over time and need regular cleaning and lubrication to work properly. Wood dust tends to gum up the moving parts of the pulleys which need to ride freely on the motor shaft and head-stock shaft.