• We just finished moving the forums to a new hosting server. It looks like everything is functioning correctly but if you find a problem please report it in the Forum Technical Support Forum (click here) or email us at forum_moderator AT aawforum.org. Thanks!
  • Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Dave Roberts for "2 Hats" being selected as Turning of the Week for April 22, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Kiln

Status
Not open for further replies.
Samuel Russo

Samuel Russo

Joined
Oct 8, 2017
Messages
30
Likes
6
Location
Binghamton, NY
This is a Kiln I made. It is 6' high, 44" wide, 21" deep. There are ventilated metal shelves, it is ventilated on top and side, has a small muffin fan for circulation, and uses two incandescent bulbs as a heat source. There is a Thermo Controler made by bayite, model BTC 201. It is on four casters. Works very well. We are downsizing and some things have to go. Located in Binghamton, NY, 13903.
contact: samuelrusso@yahoo.com
Asking $250.00 Kiln 1.jpg Kiln 2.jpg Kiln 3.jpg Kiln 4.jpg Kiln 5.jpg
 
Status
Not open for further replies.
Back
Top