• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Instant Gratification - Finishes

Joined
Jul 10, 2017
Messages
824
Likes
665
Location
Windermere, British Columbia
Mark......I'm having difficulty in finding this information directly from 3M......might be there, but I'm unsuccessful finding it.

I'm finding the same information from several alternative sources, though:

b4f2cffbd3df10dc801c47b71b513bdc.jpg


Maybe it's best to experiment, and find what works best for your purposes.

-----odie-----
7FE00CB9-E845-4FD6-A424-037048D7BB91.jpeg
 
Joined
Nov 30, 2020
Messages
50
Likes
267
Location
Clermont, Georgia
First of all I should issue an "I'M A Newbie" reminder :) ...maybe there should be a yellow stripe above our logos for the first year.:D

Okay Joe this is my way of getting a quick finish. I sand to a 2000 polish (not a big deal for me) apply 2 coats of Deft Sanding Sealer wilts still on the lathe (takes about 10 minutes to dry) and then I use 2 coats of the Hut friction wax applied one time in both directions (forward and reverse) . I think part of the trick to this is not overheating the Hut friction wax and melting the Deft sealer...cuz that'll cause an ugly streak so keep moving, and finally I polish with an auto acrylic wax gently.
....doesn't take long to do
 
Joined
Mar 8, 2018
Messages
17
Likes
9
Location
Lewis Center Ohio
I bought a bottle of General Finishes Wood Turners Finish after seeing this thread. I used it on a hurry up segmented bowl for a present. I think I may have found one that will work. I need to do some more experimenting with the best way to apply it , but it leaves a nice gloss finish and doesn't have the poly look to it. I used on Peruvian Walnut and Blood wood. It would be nice to find a grain filler that would work under the it. Directions say not to use over shellac which I normally use for grain fill. I plan on calling General Finish to get some suggestions. I will say that it dries very quickly. It seems to flow out nicely though. I put on 6 coats in about an hour. That surprised me. More to follow. It is pricey. $24.00 on Amazon for an 8 oz. bottle.

Phil
 
Joined
Aug 14, 2019
Messages
73
Likes
381
Location
Apache Junction, AZ
So to update, here is what I've come up with. Soaking a generous application of Parfix 3408 CA Glue, let it sit for 10-15 seconds to soak in, then wipe off all the excess with a paper towel. A spary or two of accelerant, then polkish with Yorkshire Microfine Abrasive Paste, and then a final coat of microcystalline wax. So far, I'm loving th results and it's quick and easy.
 
Back
Top