Advice please on sharpening/shaping and handling allen wrench for hollow turning small objects
Last edited:
-
We just finished moving the forums to a new hosting server. It looks like everything is functioning correctly but if you find a problem please report it in the Forum Technical Support Forum (click here) or email us at forum_moderator AT aawforum.org. Thanks! -
Beware of Counterfeit Woodturning Tools (click here for details) -
Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details) -
Congratulations to Dave Roberts for "2 Hats" being selected as Turning of the Week for April 22, 2024 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
hollohollow turningwing "tools"
- Thread starter cwearing
- Start date
john lucas
AAW Forum Expert
Bowl gouge and hollow tool sharpening
I put this video together last night to show how to correct bad sharpening of a bowl gouge. I also added how I sharpen my hollowing tools and a dovetail rebate tool. Hope it helps.
http://www.youtube.com/watch?v=M9G16ylEZHQ
I put this video together last night to show how to correct bad sharpening of a bowl gouge. I also added how I sharpen my hollowing tools and a dovetail rebate tool. Hope it helps.
http://www.youtube.com/watch?v=M9G16ylEZHQ
Thank you for posting. I have a carbide tip tool, but I haven't known how to sharpen it properly (I just starting turning about a year ago). I was using my bowl gouge jig, but that was making the tip to pointy.