• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Holdfast Vacuum Generator

Joined
Dec 28, 2019
Messages
448
Likes
467
Location
Tallahassee, FL
I recently purchased a Holdfast vacuum system and I hooked it up today. When I turned it on I noticed there was air leaking out from around the on/off lever of the generator (lever in the picture). I ruled out the intake and outtake for the leak so I'm reasonable sure the leak is from the lever. For those of you who have this system is leaking air normal? Thanks!
 

Attachments

  • IMG_20200410_142218765.jpg
    IMG_20200410_142218765.jpg
    256.1 KB · Views: 16
Joined
Jul 10, 2017
Messages
824
Likes
665
Location
Windermere, British Columbia
I recently purchased a Holdfast vacuum system and I hooked it up today. When I turned it on I noticed there was air leaking out from around the on/off lever of the generator (lever in the picture). I ruled out the intake and outtake for the leak so I'm reasonable sure the leak is from the lever. For those of you who have this system is leaking air normal? Thanks!
Look at specs on sheet with holdfast product.67DF6187-2029-4D0A-AEC9-52BBD93F380F.jpeg
 
Back
Top