• We just finished moving the forums to a new hosting server. It looks like everything is functioning correctly but if you find a problem please report it in the Forum Technical Support Forum (click here) or email us at forum_moderator AT aawforum.org. Thanks!
  • Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Dave Roberts for "2 Hats" being selected as Turning of the Week for April 22, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Faceplate Ring 50MM 2"

Status
Not open for further replies.
M

Mike Johnson

Joined
Jul 26, 2016
Messages
2,326
Likes
1,105
Location
Nebraska
I have a couple of extra Faceplate Rings that fit over a 50MM 2" standard set of chuck jaws w/stainless steel mounting screws. $20.00 each includes shipping Item is 3" in diameter and 3/8" thick metal contact Mikeee12345@aol.com


Ring Mount.jpg
 
M

Mike Johnson

Joined
Jul 26, 2016
Messages
2,326
Likes
1,105
Location
Nebraska
This would fit most adjustable chucks the inside diameter of the ring is 2.05" which fits most common 50mm chuck jaws when they are closed.
If someone has a slightly larger set of jaws I could put the ring in my metal lathe and open the inside diameter a few thousandths if needed.
These will readily fit all of the Nova series chucks with the 50mm jaws installed.
 
Status
Not open for further replies.
Back
Top