• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Delta wood lathe chuck

Joined
Apr 5, 2021
Messages
3
Likes
0
Location
Indian River, FL
IMG_9622.JPGI have an old 12" HD Delta lathe. Looking to turn thumbscrews and saw bolts. I've never used a metal lathe and can't quite figure out how the backplates and threaded hub parts work out. Was thinking a small 3-5" 3 jaw self centering, cheap 1-8TPI chuck would work perfect. I can't find many backplates that have 1-8TPI? Is It better to use MT2 adaptor for a metal chuck?
Figured some of you guys must turn some brass or at least how to best mount a chuck.

I have a Oneway chuck and the lathe has very little runout. As soon as I touch a small piece of brass I pushes it off center. Guessing either the chuck or the jaws doesn't have the grip to hold a piece of round stock like that. If I can work out the best mounting option then Maybe I'll looking into a cross slide or tool holder.

Thanks for the help
 

Timothy Allen

Beta Tester
Beta Tester
Joined
Sep 11, 2019
Messages
212
Likes
148
Location
Maine
Try removing the wood turning jaws from your chuck and holding your brass just with the base jaws (metal-working chucks don't typically come with front-mounted jaws like wood-turning chucks do). Another approach would be to get Oneway's #1 step jaws (#2156 for the Talon and original Oneway chuck) -- designed for holding small pieces like that (I've used them turning 1/2" aluminum rods on my lathe). Third approach might be to invest in a collet chuck like from Beall
 
Joined
Apr 5, 2021
Messages
3
Likes
0
Location
Indian River, FL
I will try removing the jaws. I really like the collect chuck idea, I only use 2 sizes of brass. I know there are a few different types, Is Beall my only option?
Considering all the different metal lathe back plates, I imagine a collet chuck other then Beall would be difficult to mount.

What about an ER32 collet chuck? comes with the chuck and 11 collets for $67. Guess I'll have to do some research on this.

Now if I can get a knurling tool working on this. Wonder if that puts a lot of pressure on the spindle and bearings?
 

Timothy Allen

Beta Tester
Beta Tester
Joined
Sep 11, 2019
Messages
212
Likes
148
Location
Maine
The Beall collet chuck IS an ER32 collet chuck, designed to mount to a wood-turning lathe spindle (available in the common spindle threads). Not sure about the one you've found -- will it mount to your lathe spindle?
 
Joined
Apr 5, 2021
Messages
3
Likes
0
Location
Indian River, FL
I noticed the Beall chuck is er32 also after posting. I searched ebay for er32 MT2,guess these are morse taper.

Which is better? Guess you'd have to use a drawbar with MT2.

Maybe a Beall 1-8TPI chuck and a set of cheap collets

Think I'll go psi chuck and a set of ebay metric collets.
 
Back
Top