spalted

THIS WAS A CROTCH IN A DOGWOOD AT MY FOLKS HOUSE, KATRINA KILLED IT AND ABOUT A YEAR AND A HALF LATER AS IT WAS BEING CUT DOWN I NOTICED THAT IT HAD SPALTED. I DIDN'T KNOW THAT WOOD COULD SPALT WHILE STILL STANDING. THIS PIECE WAS 7 FEET UP AND IS ABOUT 10 X 7 X 4.

See my site for more/better photos and info. I call this "Neighbors" because my stupid neighbor decided that every tree on his property had to go. I heard the chainsaws and paid off the landscapers to bring me the trunk with the burl and the main crotch. The burl is easily...

From the same wood as my Bow Wow ornament and my Dogwood Bowl. Called "On the Brink" because the wood was almost too far gone to use. I was determined as it was too pretty to give back to Mother Nature. Turned wet down to final thickness between 1/16 - 1/8". Nooks &amp...

Since it was snowing hard I had time in the shop this morning before logging. I just finished buffing this bowl and wanted to add it to my album. I think this is a nice piece of spalted birch worth saving. It is 6"x11". 3/32" wall thickness with a 2" recessed foot. I soaked...

6 X 3 1/4. wWalls are 1/4" thick except at the opening area. Left it just a hair thicker.

Small little dish. 5 x 2 1/4 Just a piece I found lying around.

Spalted Wormy Maple Hollow Form, 14" tall 9" Circumference featuring a Deep burned textured Tree Shape Pyrography in band. Made in two pieces

Another piece of amazing spalted Dogwood. This bowl is 4.125" w x 3.125" h. It has a Walnut base with a Swarovski crystal. You can see more detail shots on my site...

Globe: Spalted Apple - Hollowed 3" Diameter Cap & Base: Pink Ivory Height: 4" See my site for more detail shots: http://www.truffuls.com/gallery.php?homeinclude=catalog&category_id=1&parent_id=0&product_id=12&countdisplay=5&start=4&addcountview=Yes The...

A friend called when a Dogwood tree was knocked down in his yard. The closer we cut to the stump the more vivid color and spalt we saw. What we did not see was the powder post beetles.... '8-O I refused to surrender my find to bugs, the small stuff got tossed outside but the stump got double...

A finialed hollow form in spalted Norway maple and TransTint dyed holly. The finial includes a replication of the hollow form vessel just under the spike. The original block of maple weighed about 55 ounces. The finished piece including the finial weighs 4.5 ounces. This piece is one of the...

This was a beautiful chunk and it had a flat that I didn't want to remove, as it would have taken out most of the form, so I worked it into the shape. I was pretty happy with the result and was sad that it found a new home before I had a chance to take some good photos.

I had to show this one. This was one of the nicest pieces of spalted yellow birch I have come across so far. It is a yellow birch bowl I just finished, it is 16.5x5. The rim is undercut to a 3/8 wall thickness. The finish is Russ blend. I chose a foot to elevate to show the grain and figure a...

Part of the same chunk that the Vase w/ blue came from. This piece is a hollow form about 10" tall x about 7" at the widest.

This was a really weird chunk (20 x 20 x 10) of spalted maple that we very punky and rotten in some spots. Where there were holes right through the blank, I filled them with a mixture of dyed epoxy and turquoise, building the layers of time. This piece is about 10" tall and is turned to...

This piece was created from a highly spalted piece of maple. It measures 14" w by 3" h and was made for use as a fruit bowl. It is slightly deeper than a platter but shallower than a bowl of this size. Mahoney's Walnut Oil finish was used as this piece is intended for food use...

7 1/2"w x 3"h

This was a good exercise for me in light, sharp tool control, something I needed. The bark was loose and impossible to retain so I used a felt tip to blacken the rim. It has a round bottom, 1/16 walls, and is 9.75x8.75x3. I sealed with Deft and finished with Russ mix. Comments and suggestions...

I'm having fun. Last Wednesday I was in Duluth, MN, with Mike Hunter and some friends to try some of Mike

I turned this spalted maple pot 4.75x4.5x3 from a chunk I found in the woodlot getting firewood. I had to turn it when I saw the spalting in the end and this is what resulted. The pot has a round bottom and squatted as it dried. The finish is several coats of Waterlox. I am starting to like...