• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Another question on Osmo

Joined
Jul 5, 2015
Messages
312
Likes
2,763
Location
Strongsville, Ohio
For those who use Osmo, do you have any experience of this coating on non-wood surfaces? I frequently have filled cracks or inlay on my pieces, and am wondering if Osmo will work. .
 
Joined
Jun 6, 2018
Messages
1,948
Likes
996
Location
La Grange, IL
A piece I did recently with Osmo also had a large defect filled with epoxy. The epoxy and Osmo seem fine. I don't know how much of a film the Osmo made over the epoxy surface, but it didn't bead up, smear or otherwise look "different". The epoxy was reasonably shiny, but the whole surface had been sanded to p1200.
 
Back
Top