• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Natural Edge Maple Chip & Dip Bowl
Joe Centorino

Natural Edge Maple Chip & Dip Bowl

I know convention says one should typically balance out the high and low points of a natural edge bowl to make the form more "pleasing", however I tend to lean more towards accentuating the differences sometimes. The piece is 17" in diameter and because it was off balance it made turning a little more difficult and I had to keep a lower speed on the lathe. The finish is tung oil which is my goto for most of my bowls.

Media information

Album
Beppo's Workshop
Added by
Joe Centorino
Date added
View count
1,533
Comment count
2
Rating
5.00 star(s) 1 ratings

Image metadata

Device
LGE LM-G820
Aperture
ƒ/1.5
Focal length
4.2 mm
Exposure time
1/400 second(s)
ISO
50
Flash
Off, did not fire
Filename
0108201138.jpg
File size
2.8 MB
Date taken
Wed, 08 January 2020 11:38 AM
Dimensions
4032px x 3024px

Share this media

Back
Top