• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Rikon Woodfast 70 500

Joined
Feb 18, 2013
Messages
9
Likes
0
Location
Denver
Any of you guys own a Rikon Woodfast 70 500? I bought mine 4 months ago and I'm very pleased, I just don't see much information in the internet or see many people with a similar lathe. I know this model was taken from the Australian Woodfast lathe, but would like to hear your thoughts about it.

Thanks!

Adam Luna
 

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,075
Likes
9,477
Location
Panning for Montana gold, with Betsy, the mule!
A few years back, there were complaints about the quality of the Rikon Woodfast lathe. Haven't heard much about them lately. The Woodfast is a very simple machine. Cast iron with simple finish machining. As long as those two things are done well, it would be hard to have a bad lathe. What brand of motor did they use?
 

Bill Boehme

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Jan 27, 2005
Messages
12,886
Likes
5,169
Location
Dalworthington Gardens, TX
Website
pbase.com
I found several reviews of the lathe. I also found all of the technical details, FAQ's, and owners manual on the Rikon web site. Maybe you could start the ball rolling by posting your feedback on the lathe. That way, other owner's could use search engines to find the thread and share their experiences.
 

hockenbery

Forum MVP
Beta Tester
TOTW Team
Joined
Apr 27, 2004
Messages
8,591
Likes
4,886
Location
Lakeland, Florida
Website
www.hockenberywoodturning.com
Any of you guys own a Rikon Woodfast 70 500? I bought mine 4 months ago and I'm very pleased, I just don't see much information in the internet or see many people with a similar lathe. I know this model was taken from the Australian Woodfast lathe, but would like to hear your thoughts about it. Thanks! Adam Luna

Adam I have owned a 20" woodfast for a long time 18 years plus. Used to be my main lathe then it was Sherry's main lathe.
We still use in classes and it is a good machine. Also taught lots of classes at Md. Hall with 8 woodfasts for the students.

I did 3 or 4 demos on the Ricon version a few years ago.
It performed well and it was a lot like the woodfast.
The controls are improved over the ones on my woodfast. Ricon gave it a wide footprint so it can handles out of balance work better that my woodfast.

It is a lathe that will work well.
I would like to see better locks on the tool rest for sure.
When I turn on a woodfast or any machine with a short lock on the tool rest I give the locking handle a tap with the gouge handle when I lock it.
They just come loose too often.
I would like to see a bigger hand wheel on the tailstock too small for serious drilling it is okay for between center work.

I would also like a self ejecting tail center. But it is easy enough to use the knockout bar. It is also a real easy to unlearn that once I had lathes that self eject.

Have fun,
Ak
 
Joined
Feb 26, 2010
Messages
184
Likes
16
Location
Riverside Ohio
I don't know about the larger lathes, but my Rikon Mini lathe I like very much. For smaller work it is ideal, spindles or smaller bowls. Speed choices are very desirable.
 
Joined
Feb 18, 2013
Messages
9
Likes
0
Location
Denver
Thanks for the comments, yes the tool rest lock appears to be too small for sure, and I think that was one of the issues with it on past reviews I have read, other than that I'm pretty happy with it. I don't know what motor I have I will look it up tonight and get back on that one. it's very quite compared to my previous Reeves motor ones 1641 VS Jet. It is solid for sure, I just don't like the fact that the Electronic Speed Display stays on at all times... It just seems that might burn down at some point. Do you know if there's a way to get this not to stay on at all times?

Thanks!
 
Back
Top