• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

6 X 6 X 3 Turning Blanks, What to Make

Joined
Mar 19, 2016
Messages
1,174
Likes
1,268
Location
Haubstadt, Indiana
I have several 6 x 6 x 3 and 6 x 6 x 4 Exotic turning blanks. The only thing I can think of to make from them are a small bowls. The 6 x 6 x4 is pink ivory, a couple of purpleheart, desert ironwood, and mystery wood.
 

hockenbery

Forum MVP
Beta Tester
TOTW Team
Joined
Apr 27, 2004
Messages
8,590
Likes
4,885
Location
Lakeland, Florida
Website
www.hockenberywoodturning.com
Last edited:
Joined
Aug 14, 2007
Messages
5,435
Likes
2,792
Location
Eugene, OR
I think of hollow forms and lidded boxes mostly. You could get some smaller bowls out of them, depending on the grain orientation of the blanks. End grain bowls also possible. They are a bit small to cut into 1/4 lengths and then turn smaller boxes out of, but the smaller ones are better for threaded boxes.

robo hippy
 
Joined
Oct 3, 2013
Messages
169
Likes
228
Location
Ambridge, PA
Offset turning could be another option. Here's one I did a couple weeks ago out of walnut for our local chapter instant gallery.
ec2.jpg
 
Joined
Jun 6, 2018
Messages
1,948
Likes
996
Location
La Grange, IL
I think you have an opportunity to do a bowl design with some height. An umeke form is one thought, or perhaps a nearly spherical bowl with rolly polly bottom. Take a sheet of paper and draw a 6x4 (or 6x3) rectangle, then sketch some bowl cross sections that make use of the box.
 
Joined
Mar 19, 2016
Messages
1,174
Likes
1,268
Location
Haubstadt, Indiana
Thanks. I didn’t know of seed jars. I’ll do one of those and a lidded box. I do have the Axminister eccentric chuck that would make a offset bowl easy to do. Still interested in other ideas.
 
Joined
Aug 14, 2007
Messages
5,435
Likes
2,792
Location
Eugene, OR
Hmm, another thought, the 'emerging' bowl concept. I tried a couple after watching a Mike Waldt video about it. It was fun, and different...

robo hippy
 
Joined
Nov 30, 2020
Messages
50
Likes
267
Location
Clermont, Georgia
I textured a 2" metal hemisphere and ground a taper on a 1/2"dia. metal rod. welded the two together and glued it to the wood. The ring is 1/8"x1/2" flat (available at HD or lowes) textured, sanded and buffed, ...glued to the wood. The texturing is done with a torch...
>source for the metal hemisphere..... https://www.kingmetalscatalog.com

William, I'm reluctant to be more specific without knowing more about your metal working background. Welding with a torch requires another volume of safety knowledge:rolleyes: ... I'd be glad to detail things like that to you privately, email, etc.
 
Joined
Mar 19, 2016
Messages
1,174
Likes
1,268
Location
Haubstadt, Indiana
I textured a 2" metal hemisphere and ground a taper on a 1/2"dia. metal rod. welded the two together and glued it to the wood. The ring is 1/8"x1/2" flat (available at HD or lowes) textured, sanded and buffed, ...glued to the wood. The texturing is done with a torch...
>source for the metal hemisphere..... https://www.kingmetalscatalog.com

William, I'm reluctant to be more specific without knowing more about your metal working background. Welding with a torch requires another volume of safety knowledge:rolleyes: ... I'd be glad to detail things like that to you privately, email, etc.

Don’t worry I won’t be trying to duplicate. I have a small wire welder, but not a lot of welding skill. I sold my torch equipment years ago. Just wanted a how/what as they make an impressive turning.
 
Joined
Nov 30, 2020
Messages
50
Likes
267
Location
Clermont, Georgia
William, I'm not at all worried about duplication. it really is about safety. id hate for someone to read hoe to do it and start a fire. My Daughter is a safety Engineer for a large company and she hounds me all the time:D.... can you tell me the flash point for saw dust?... she can and will:D
 
Joined
Mar 19, 2016
Messages
1,174
Likes
1,268
Location
Haubstadt, Indiana
Lawrence, I understand what you are saying. I was a engineer for turbine engines used in helicopters. Safety is #1.
Your work is just several levels way above. Fascinating to look at.
 
Joined
Aug 14, 2007
Messages
5,435
Likes
2,792
Location
Eugene, OR
I don't know the flash point of saw dust, but love the videos of saw dust cannons on You Tube.... Major POOF!

robo hippy
 

Bill Boehme

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Jan 27, 2005
Messages
12,884
Likes
5,168
Location
Dalworthington Gardens, TX
Website
pbase.com
I have several 6 x 6 x 3 and 6 x 6 x 4 Exotic turning blanks. The only thing I can think of to make from them are a small bowls. The 6 x 6 x4 is pink ivory, a couple of purpleheart, desert ironwood, and mystery wood.

Getting back to your original question, I don't have a recommendation for what to make, but I do have a design guideline: Don't let the dimensions of the turning blank determine the form of your project. Beginning woodturners often feel compelled to maximize the use of wood at the expense of good proportions. It's a tough temptation to overcome for a frugal woodturner.
 
Joined
Feb 8, 2014
Messages
1,173
Likes
611
Location
Evanston, IL USA

brian horais

Beta Tester
TOTW Team
Joined
Dec 20, 2014
Messages
249
Likes
1,844
Location
Knoxville, TN
Website
www.horais.com
I like to turn half-twist bowls and then embellish the edges to highlight the interesting contours. Here are some images of bowls I have made from blanks similar to what you mentioned. I've also included an image of the extensions I add to the bowl blank to make it 'tame-able' on the lathe for twisted turning. You can see more of my technique in my YouTube video at:

View: https://youtu.be/j4r3_oqpm1k

tamtwist 4a.jpg


BH-8.jpg


cherry twist 1a.jpg

Enjoy!
 
Joined
Aug 14, 2007
Messages
5,435
Likes
2,792
Location
Eugene, OR
During this flu thing, I have started doing more cooking, and now they all use Kosher salt, which is very coarse. I am finding that I need to make a salt box.....

robo hippy
 
Joined
Mar 19, 2016
Messages
1,174
Likes
1,268
Location
Haubstadt, Indiana
Somewhat related, Is there a reason to to use spray can varnish on lidded boxes or small non-utility bowls. The reason I ask is with exotics, they are sensitive to uv and the varnish has uv inhibitors. I don’t recall seeing anything stating the finish was varnish.
 
Joined
Jul 10, 2017
Messages
824
Likes
665
Location
Windermere, British Columbia
I have several 6 x 6 x 3 and 6 x 6 x 4 Exotic turning blanks. The only thing I can think of to make from them are a small bowls. The 6 x 6 x4 is pink ivory, a couple of purpleheart, desert ironwood, and mystery wood.
The 6*6*4 pink ivory I’d cut into 4 pieces and make 4 small lidded boxes. Or two 6 inch high salt and pepper grinders.
 
Joined
Jan 3, 2021
Messages
413
Likes
511
Location
Spartanburg, SC
I made my first couple of bowls out of blanks roughly that size that I ordered from Cook Woods. And though I haven't worked up the courage to turn a desert ironwood bowl blank that I have yet, the shaving brushes that I have made from it finish to a stunning chatoyance. Because it is so hard, it is rough on tools, and for me at least, kind of scary to turn. DI is one of the most beautiful woods in the world IMO, along with some of the more exotic figured walnuts.
 
Joined
Mar 19, 2016
Messages
1,174
Likes
1,268
Location
Haubstadt, Indiana
Well I turned a piece of purpleheart and made a lidded box. 6” diameter 7” tall. Added a yellowheart lid and African Blackwood finial. Different style lidded boxes seem to be a decent choice. Still have more small exotics yet to turn. Won’t rush.


22BEBC41-F5BB-447A-9638-B6F774129009_1_201_a.jpeg 9058E5FB-5A2C-4574-8CB9-74F77E3747CD_1_201_a.jpeg

This is a piece of cocobolo I turned. I have another half of this piece and maybe more of this wood in 4 x 4 x 12 squares I need to cut.

5AD7A322-D556-48F1-9110-31FEB711E265.jpeg
 
Last edited:
Back
Top