• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Need finish idea

Joined
Jan 6, 2020
Messages
16
Likes
2
Location
Clovis, California
I'm going to tackle making some grinders with Spectraply blanks. I'm not sure of what finish to use, friction polish, some kind of poly like Deft, or ???? I would appreciate some ideas.
Thank you
Danny
 
Joined
Jun 6, 2018
Messages
1,948
Likes
996
Location
La Grange, IL
I use and recommend Bartley Clear Stain/Varnish.

https://woodworker.com/gel-varnish-mssu-875-212.asp

I see they are out of stock for the time being, but the product is easy to use and reliable. Wipe on, wipe off, buff by hand, let cure 6 hours, and repeat for a total of 3 coats. No sanding needed between coats in my experience, and my shop is not particularly dust free. The finish is a fully curing film which is satin sheen. I believe it is a mix of alkyd resin and polyurethane.
 
Joined
Jan 6, 2020
Messages
16
Likes
2
Location
Clovis, California
I use and recommend Bartley Clear Stain/Varnish.

https://woodworker.com/gel-varnish-mssu-875-212.asp

I see they are out of stock for the time being, but the product is easy to use and reliable. Wipe on, wipe off, buff by hand, let cure 6 hours, and repeat for a total of 3 coats. No sanding needed between coats in my experience, and my shop is not particularly dust free. The finish is a fully curing film which is satin sheen. I believe it is a mix of alkyd resin and polyurethane.

Mark.... Thank you, unfortunately they can't ship to the wonderful state of Cali.
 
Joined
Jan 18, 2006
Messages
101
Likes
47
Location
Pueblo West, CO
Danny, I don't know if Ace Hardware is doing business In CA, but here they carry finishes that the big box outfits don't carry
 
Joined
Jan 22, 2018
Messages
261
Likes
312
Location
Cameron, Illinois
With your limitations in Cali, I'd probably go with a clear coat acrylic. Krylon is one to look for. Sometimes these are marketed as acrylic lacquer, but they don't have any lacquer (nitrocellulose) in them. These are "water" clear finishes that won't yellow with age.

You could go with an oil modified poly (water based), but they will impart an amber tone that you may not be happy with on the spectraply.
 
Joined
Jan 18, 2006
Messages
101
Likes
47
Location
Pueblo West, CO
Danny, that is the only place that sells Antique Oil. It should do a job on the grinders but you probably need 5-6 coats depending on the look you want. Allyn
 
Joined
Mar 17, 2006
Messages
213
Likes
96
Location
Canton, Connecticut
For something handled as much as a grinder, a film finish is my choice. I use a "regular" gloss polyurethane, diluted 1:1 with mineral spirits, and apply as a wipe-on. I buff with 0000 steel wool between coats, and find that 3 coats provides a nice finish, without it looking plasticized. If you want a crystal clear film finish, water based poly will do the job. I've never used it as a wipe-on; I don't know if it can be diluted.
 
Joined
Jan 6, 2020
Messages
16
Likes
2
Location
Clovis, California
For something handled as much as a grinder, a film finish is my choice. I use a "regular" gloss polyurethane, diluted 1:1 with mineral spirits, and apply as a wipe-on. I buff with 0000 steel wool between coats, and find that 3 coats provides a nice finish, without it looking plasticized. If you want a crystal clear film finish, water based poly will do the job. I've never used it as a wipe-on; I don't know if it can be diluted.

Ed... THANKS. I think I will try the water based poly. Hopefully I can do it right.
 
Back
Top