• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Woodturning books

Joined
May 13, 2019
Messages
28
Likes
3
Location
North Augusta, South Carolina
This may be a bit of an insignificant topic for a new thread however a search turned up only fruitless results. Are there any books that any of you would suggest reading on woodturning, despite whether it is geared towards technique, history or miscellaneous ramblings fixed on the subject? I'm sure most techniques and advice can be found on youtube but some of us still enjoy written prose as a conduit of information.
Thanks
 
Joined
May 25, 2010
Messages
121
Likes
68
Location
Prince Frederick, MD
I'm sure you'll get a huge number of responses to this, but I have to throw in a recommendation for David Ellsworth's book. Easily one of the best woodturning books I have ever read. Even through he is most famous for his hollow forms, you don't get there without a solid grounding in the fundamentals. He covers all of that in his book, and the style is very easy to read. Highly recommended.

-Dan
 
Joined
Jul 5, 2016
Messages
469
Likes
244
Location
San Antonio, TX
I second ellsworth’s Book. I’ve seen his videos and taken his class. The book is covers the exact same techniques he used and I use it as a refresher/reference.
 

hockenbery

Forum MVP
Beta Tester
TOTW Team
Joined
Apr 27, 2004
Messages
8,593
Likes
4,890
Location
Lakeland, Florida
Website
www.hockenberywoodturning.com
David’s book is always a good choice.

Understanding wood
- Bruce Hoadley is good fit in every woodturner’s Library

If you are interested in thinking outside the box
Woodturning Wizardry - David Springette

Artistic Woodturning - Dale Nash
 
Joined
Jan 24, 2010
Messages
3,058
Likes
900
Location
Cleveland, Tennessee
Check with used bookstores, too. Got some great bargains at the McKay's store in Chattanooga. Have one around you? Library is a great sources. Read it and return it. If you have a technical school close that teaches woodworking, they might have some in their library.
 
Joined
Jul 26, 2016
Messages
2,326
Likes
1,105
Location
Nebraska
You can also find a number of pdf articles and books on Google when you search for "woodturning" pdf or "wood turning" pdf.
 
Joined
Sep 27, 2017
Messages
396
Likes
204
Location
Windsor, Pennsylvania
Anything by Raffan. However. to paraphrase a movie line from 35 years ago, "Print is {nearly} dead." There are a multitude of excellent turning videos out there and if you don't get how one person explains it, just watch another person. and another. I had trouble getting the trick of a particular tool and just could not follow either the print or several videos in English. I ran across a German video on the same tool and watched with the sound turned off. The guy demonstrated the technique so well, I got it immediately. Now how much I was slowly getting from the others I can't say, but the German fellow got me over the hump. A month or so ago, I watched a few Russian videos on you tube and suddenly a few techniques with the skew became clear (er) . .
 
Joined
Nov 8, 2017
Messages
144
Likes
34
Location
Idaho
Perry, I like print over computer (what can I say, I'm a dinosaur :D). However, I also like a video in conjunction with print. In fact, the Raffan book I mentioned above (Turning Boxes) has a video also available. Best of both worlds for me when used in conjunction with each other.
 
Joined
May 13, 2019
Messages
28
Likes
3
Location
North Augusta, South Carolina
I overwhelmingly prefer print over written electronic media. Videos are priceless I only asked for books because I do very well conceptualizing something before I set out to do it, accompanied with videos reflecting what I've read it shortens the learning curve for me significantly. However good ole fashioned hard experience is unbeatable. So do woodturners prefer electronic media to print as it leaves more wood untouched and available for turning rather than being printed on? ;)
 
Joined
Jul 26, 2016
Messages
2,326
Likes
1,105
Location
Nebraska
I am a little old fashion and prefer reading Sumerian Clay Tablets some of them describe the ancient methods of machining and crafting stone and wood items with machines they built over 5 thousand years ago. One of the tablets had a scribed drawing of an ancient style lathe that was used to machine some of the intricate stone bowls and vases back then. Shown below is the best image I could lift and copy from the stone tablet.

Sumerian lathe.jpg
 
Joined
Aug 26, 2006
Messages
655
Likes
554
Location
Hampton Roads Virginia
The first step is admitting you have a problem... I know they are not worth what I payed for them but I like holding a book and flipping pages. Maybe when they flood the used book shop shelves, some kid will stumble upon them, pick a few, and enjoy them as much as I have...
Turning Books.jpg
 
Joined
May 4, 2010
Messages
2,432
Likes
1,850
Location
Bozeman, MT
I second Richard Raffan's Turned-Bowl Design. I'm just finishing it and it's one book whose value has not been duplicated on DVD or Youtube, as far as I have seen.
 

Mark Hepburn

Artist & Chef
Joined
Mar 26, 2014
Messages
1,621
Likes
577
Location
Houma, Louisiana
I overwhelmingly prefer print over written electronic media. Videos are priceless I only asked for books because I do very well conceptualizing something before I set out to do it, accompanied with videos reflecting what I've read it shortens the learning curve for me significantly. However good ole fashioned hard experience is unbeatable. So do woodturners prefer electronic media to print as it leaves more wood untouched and available for turning rather than being printed on? ;)

Hey Joshua,

Well not to sound like a huckster, but I happen to have Turning Bowls by Richard Raffan listed in the For Sale Forum here. Thread title is "Still More Books for Sale". I'd rather see it go to a good home than make five bucks, so if you'll PM me your address and cover the cost of postage, I'd like you to have it. The last book I sent by Media Mail cost $3.27 to send.

:)
 

Bill Boehme

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Jan 27, 2005
Messages
12,886
Likes
5,169
Location
Dalworthington Gardens, TX
Website
pbase.com
Hey Joshua,

Well not to sound like a huckster, but I happen to have Turning Bowls by Richard Raffan listed in the For Sale Forum here. Thread title is "Still More Books for Sale". I'd rather see it go to a good home than make five bucks, so if you'll PM me your address and cover the cost of postage, I'd like you to have it. The last book I sent by Media Mail cost $3.27 to send.

:)

And, that's not all. If you call in the next 15 minutes we'll double your order and give you a roll of Flex Tape absolutely free!! :D
 

Mark Hepburn

Artist & Chef
Joined
Mar 26, 2014
Messages
1,621
Likes
577
Location
Houma, Louisiana
And, that's not all. If you call in the next 15 minutes we'll double your order and give you a roll of Flex Tape absolutely free!! :D

But wait, there’s more,,.

That can of black goo that seals boats can be yours! Just pay shipping that costs more than the actual product and...
 
Joined
Jun 6, 2018
Messages
1,948
Likes
996
Location
La Grange, IL
I'll throw this title out for your consideration: "The Creative Woodturner", by Terry Martin.

Although he does discuss some of his unusual techniques the book is not just a "how to", but also valuable for his discussion of "what to" and "why to".
 

Mark Hepburn

Artist & Chef
Joined
Mar 26, 2014
Messages
1,621
Likes
577
Location
Houma, Louisiana
I'll throw this title out for your consideration: "The Creative Woodturner", by Terry Martin.

Although he does discuss some of his unusual techniques the book is not just a "how to", but also valuable for his discussion of "what to" and "why to".

Mark, I just found a used copy in several places. The cover alone is worth th $6.50 and I'm getting one. Thanks.

Links:

https://www.barnesandnoble.com/p/th...Ck-W9MuXOdreA-fEWgEnhjGTsQKvbcLNvkhoCLZzw_wcB

https://www.abebooks.com/Creative-W...95P51cL0q1xCZTBbs8PIoWoQP1D6Jh1z41BoCJ_vw_wcB
 
Joined
Dec 7, 2012
Messages
272
Likes
115
Location
Albuquerque, NM
This may be a bit of an insignificant topic for a new thread however a search turned up only fruitless results. Are there any books that any of you would suggest reading on woodturning, despite whether it is geared towards technique, history or miscellaneous ramblings fixed on the subject? I'm sure most techniques and advice can be found on youtube but some of us still enjoy written prose as a conduit of information.
Thanks
Woodturning: A Foundation Course (Keith Rowley)
Turning Wood with Richard Raffan
Turned-Bowl Design (the out-of-print edition), Richard Raffan
Woodturing Projects: A workshop guide to shapes, Mark Baker

I like the Rowley book and the Raffan design book the most, with the other Raffan book a close second. The Mark Baker book is very good, but the "how to" pictures are a bit too small for my eyes. I think Mark's book is better once you have your fundamentals sorted out.
 
Back
Top