• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Truly Unique Lathe Built by Turning Legend Soren Berger

Status
Not open for further replies.
Joined
Oct 11, 2017
Messages
4
Likes
3
Location
Strongsville, OH
Soren Berger hand built lathe. Bed, headstock and headstock legs are fashioned from Alden (Australian GM) engine blocks. Milled steel plate bed ways are bolted to the engine blocks. Tailstock leg is a crankshaft. Most levers and a handy tool rack are fashioned from camshafts and piston rods. Drive is a 3-hp motor with variable frequency drive (220VAC Input). Tailstock rotates out of the way without removal...a common feature now, but first shown to the market on this machine. Swing over bed is 15" (30" capacity) with 24 inches between centers. Soren has been turning on one of these lathes for decades. I commissioned him to build 4 of these for me in 2000. I sold three of them at the 2001 AAW national symposium in Minneapolis. Never planned on selling this one, but now I am downsizing and I'll never get this in my new home. Available for local pick only in Cleveland, Ohio, area. Palletized and we have equipment to help load. Weighs about 900 pounds and purrs like a kitten. One of the most stable turning platforms you will ever encounter.

Edited 5/4 -- Fixed capacity. It is 30 inch diameter, 24 between centers. Originally written backwards.

IMG_20180426_152550051 - Edited.jpg
 
Last edited:
Joined
Sep 2, 2017
Messages
155
Likes
72
Location
Sterling, CT
Soren Berger hand built lathe. Bed, headstock and headstock legs are fashioned from Alden (Australian GM) engine blocks. Milled steel plate bed ways are bolted to the engine blocks. Tailstock leg is a crankshaft. Most levers and a handy tool rack are fashioned from camshafts and piston rods. Drive is a 3-hp motor with variable frequency drive (220VAC Input). Tailstock rotates out of the way without removal...a common feature now, but first shown to the market on this machine. Swing over bed is 12" (24" capacity) with 30 inches between centers. Soren has been turning on one of these lathes for decades. I commissioned him to build 4 of these for me in 2000. I sold three of them at the 2001 AAW national symposium in Minneapolis. Never planned on selling this one, but now I am downsizing and I'll never get this in my new home. Available for local pick only in Cleveland, Ohio, area. Palletized and we have equipment to help load. Weighs about 900 pounds and purrs like a kitten. One of the most stable turning platforms you will ever encounter.

View attachment 25328
You never said what the price is.
 

Bill Boehme

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Jan 27, 2005
Messages
12,886
Likes
5,169
Location
Dalworthington Gardens, TX
Website
pbase.com
Jeff, there are many woodturners who view the Marketplace Ads on this site, but aren't forum members. In order for any of those people to be able to contact you they need either an email address or a phone number.
 
Status
Not open for further replies.
Back
Top